User Manual

Selecting Settings for Capture
176
For information about other settings in the General Settings dialog box, see “General Settings”
on page 1411. For information on opening the General Settings and other settings dialog boxes,
see “Viewing and Modifying Settings” on page 1339.
Capture-Related Settings for Film and 24p Projects
The following settings are important when you are capturing video transferred from film or
capturing 24p video. You should specify these settings for film or 24p projects immediately after
you create a new project and before capturing. For information about other film settings, see
“Film and 24P Settings” on page 1406.
Setting Description
Project Type The top portion of the dialog box displays the project type (NTSC or PAL)
and other useful information such as the type of film used as source media.
NTSC Has Setup This option applies to standard NTSC format and is selected by default. If
the source footage is in the NTSC-EIAJ format standard (used primarily in
Japan), deselect NTSC Has Setup.