User Manual

Batch Capturing from Logged Clips
241
Batch Capturing Clips
To batch capture clips:
1. Select the proper Capture settings and set up the capture tools, as described in “Preparing for
Capture” on page 159.
2. Open the bin that stores the clips you want to capture.
3. Select the clips to batch capture:
t Select Edit > Select All.
t Ctrl+click to select specific clips.
n
If you are batch capturing the original source master clips used in the sequence, the sequence is
updated automatically. Therefore, you might want to deselect the sequence during this
procedure. See “Recapturing and Decomposing” on page 243.
4. Select Clip > Batch Capture.
The Batch Capture dialog box opens. If the clips you want to batch capture are not
highlighted in the active bin, Batch Capture appears dimmed in the Clip menu.
5. Select options in the dialog box: