User Manual

Controlling Decks from the Keyboard
260
To create a new tape name by using a keystroke in Capture mode:
1. Select Tools > Capture.
The Capture tool opens.
2. Do one of the following:
t Load a tape in the deck.
t Click the Source Tape Display button.
The Select Tape dialog box opens.
3. Press Ctrl+N (Windows) or Command+N (Macintosh).
A new tape name text box opens.
4. Type the new tape name.
5. Press Enter (Windows) or Return (Macintosh) to register the tape name.
6. Press Enter (Windows) or Return (Macintosh) or click OK to close the Select Tape dialog
box.
Controlling Decks from the Keyboard
You can use the J-K-L keys to control a deck from the Capture tool, Digital Cut tool, and Deck
Controller window.
The J-K-L keys work in the same way as they do in the Source and Record monitors. See
“Playing Footage with the J-K-L Keys (Three-Button Play)” on page 512.
Press To
K Stop the deck.
L Shuttle the deck at 1x, 2x, 3x, 5x, 8x, 16x, or 24x normal speed.
J Shuttle the deck at –1x, –2x, –3x, –5x, –8x, –16x, or –24x normal speed.
K+L Shuttle the deck at 0.25x normal speed.
J+K Shuttle the deck at –0.25x normal speed.