User Manual

Working with Bin Columns
347
Duplicating Bin Columns with Timecode Information
You can duplicate existing columns containing timecode information into other compatible
columns that you target.
When you duplicate a timecode column (Start, TC 24, TC 25, TC 25P, or TC 30), the values for
master clips and subclips convert to the appropriate timecode. For more information, see
“Displaying Timecodes in a 24p or 25p Project” on page 350.
To duplicate a timecode column:
1. Click the column head you want to duplicate.
2. Select Edit > Duplicate.
The Select dialog box opens.
3. Select a column name from the list.
The column must contain the same type of data for the copy to occur. For example, you can
copy start timecodes to the Auxiliary TC column, but you cannot copy timecodes to the
Pullin column.
4. Click OK.
The column of information appears in the column you designated.
Adding Customized Columns to a Bin
In addition to the standard column headings, you can add your own column headings to describe
information about clips and sequences. For example, you might want to add a column heading to
describe what kind of shot (close-up, wide shot, master shot, extreme or close-up) is used in a
clip.
To add a new custom column:
1. Move any existing column to the right or left to create an empty area.
Move the column partly over the adjacent column. If you move the column too far, the
column repositions.
2. Click an empty area to the right of the current headings in the headings box.
A text box appears.
3. Type the column heading you want, and press Enter (Windows) or Return (Macintosh).
Column headings must contain a maximum of 14 characters, including spaces.
This places the pointer in the data box, beside the first clip in the bin.
4. Select Bin > Align to Columns after you enter the new column heading.