User Manual

Modifying Clip Information
355
Field Motion Sets the default source parameter value for the Motion Adapter effect.
Film TC Timecode you use on film. For 24p and 25p projects only.
Format The format of a clip or sequence which you determine by the project type, such
as 30i NTSC or 1080i/59.94. This is useful if you have both SD and HD clips in
the same bin.
FPS Play rate: the number of frames that display each second. The default is 29.97
for NTSC and 25 for PAL for video. The play rate is also 24 or 23.98.
Frame Displays the same frame that displays when you select Frame view. See “Using
Frame View” on page 330.
n
It takes longer for the screen to display frames than text.
IN-OUT Length of the marked segment.
Ink Dur Displays the length of the clip, in ink number. For 24p projects, 25p projects, and
matchback projects only. You cannot modify this number.
Ink Edge Type of edgecode you use in the ink number. See “Selecting an Edgecode Type”
on page 365.
Ink End Ending ink number for the clip. You cannot modify this number.
Ink Film Film gauge for the ink number. See “Selecting a Film Gauge” on page 364.
Ink Number Ink number for the clip. For 24p projects, 25p projects, and matchback projects
only.
Journalist First and last name of a person associated with the clip. Metadata information
from a P2 file. Modifiable after capture with no restrictions.
KN Dur Length of the clip, expressed in feet and frames.
KN End Ending key number for the clip.
Modifiable after capture only for 24p, 25p, and matchback projects. If you alter
the starting key number, you also alter the KN Start to maintain the duration.
KN Film Key number film gauge. See “Selecting a Film Gauge” on page 364.
KN IN-OUT Mark IN and Mark OUT key number for the clip.
KN Mark IN Key number for the IN point, if you set one for the clip.
KN Mark OUT Key number for the OUT point, if you set one for the clip.
Bin Column
Heading Description