User Manual

Modifying Clip Information
356
KN Start Starting key number for the clip.
Modifiable after capture only for 24p, 25p, and matchback projects. If you alter
the starting key number, you also alter the KN End to maintain the duration. This
causes discrepancies with any auxiliary timecode information that you enter
manually.
Labroll Labroll containing the clip.
Lock Specifies whether the clip is locked from deletion.
LUT File name of the color look-up table used for the series of clips or frames.
Mark IN Timecode for the IN point, if you set one for the clip.
Modifiable after capture — altering the mark IN also alters the IN to OUT
duration. This replaces any previous mark.
Mark OUT Timecode for the OUT point, if you set one for the clip.
Modifiable after capture — altering the mark OUT also alters the IN to OUT
duration. This replaces any previous mark.
Master Dur Length of the final master sequence, expressed in feet and frames. You cannot
modify this number.
Master Edge Type of edgecode used in the final master sequence. See “Selecting an Edgecode
Type” on page 365.
Master End Ending key number for the final master sequence. You cannot modify this
number.
Master Film Gauge of the final master sequence. See “Selecting a Film Gauge” on page 364.
Master Start Starting key number of the final master sequence.
Media Status Status of the media in the export Volume Bin. See “Working with Export
Volumes” on page 430.
Modified Date Date and time a sequence was last edited or changed.
Offline Track names for any media files offline.
Perf Film edge perforations format used for 3-perf projects.
Pixel Aspect Ratio Indicates the shape of each pixel in the image. Ratio of width to height.
Bin Column
Heading Description