User Manual

Selecting the AMA Settings
379
3. Click the Volume Mounting tab.
4. If you want the system to automatically scan drives (volumes) every time, select the option
“When mounting previously mounted volumes, do not check for modifications to the
volume.” This option is off by default.
5. If you remount a volume, deselect the option “When mounting previously mounted volumes,
do not check for modifications to the volume,” and the system checks the modification date
of the device or drive against the last time the clips were linked. If the date is the same, the
clips come back online. If the date is different, the system links the clips again, and links any
new clips added to the volume. This option is off by default.
n
If you restart your Avid editing application, the system automatically rescans the drives
regardless of the options you’ve selected.
6. To customize your bin, click the Bins tab.
By default, the system links your clips into a new bin using the same name as your project
name. If you want to change the bin name or want to use an already existing bin, you can
make these changes in the Bins tab.
For more information on Bins options, see “AMA Settings: Bins Tab” on page 1351.
n
Depending on your AMA Settings, every time you insert a card into a reader , the system creates
a new bin whether the same card or device has been previously inserted or not.
7. To map source audio channels to multichannel or mono tracks in your clips, click the Link
Options tab, and then click Edit.