User Manual

Sequence and Clip Information Summary
551
n
If a plug-in is not loaded on your system when you generate the summary, if you select the option
"Show Missing Effects Only" from the Sequence Report dialog box, the information displays
"unavailable effect," in addition to the plug-in name, the plug-in ID (is this gone?), and other
information associated with the effect. (Is the vendor and version number displayed). This is
helpful when identifying the effect.
Creating a Summary of Effects and Source Information
Before you use the Sequence Report dialog box to create a summary of effects, source
information, or clip information, you might want to do the following:
• Determine if you want the report to cover specific tracks or a section of the sequence
between In and Out points. Loading a sequence in the Source/Record monitor before you
generate a report allows you to select which part of the sequence about which you want
information.
• Choose the summary options you want information on — types of effects, location of
effects, source information, or clip information.
n
You can modify the sequence name and the starting timecode in the Sequence Report dialog box.
To generate a summary report:
1. Do one of the following:
t From a bin, right-click a sequence and select Sequence Report. You can select multiple
sequences for generating reports.
t With a sequence loaded in a monitor, right-click the monitor and select Sequence
Report.
The Sequence Report dialog box opens.