User Manual

Using Clip Volume and Pan Mode
808
7. When you finish adjusting the LFE with the Advanced Panner, click the Close button to
return to the Audio Mixer tool.
Audio Mixer Fast Menu: Clip Volume and Pan Mode
The commands in the Audio Mixer tool Fast menu operate differently, depending on the types of
points you set within the clip or sequence, as described in the following table:
The following table describes the Audio Mixer tool Fast menu commands for Clip Volume and
Pan mode:
Points Set Description
Both In and Out points Commands apply adjustments to selected tracks between the points.
In point only Commands apply adjustments to full clips from the In point to the end of
selected tracks.
Out point only Commands apply adjustments to full clips from the beginning of selected
tracks to the Out point.
None Commands apply globally (across entire tracks).
Command Description
Set Level on Track,
Set Pan on Track
Applies the same pan or volume levels currently set in the Audio Mixer
tool to all segments in the marked regions of the tracks.
Adjust Pan/Vols on Track Opens a dialog box for making incremental adjustments to all current
settings across segments in the marked regions of selected tracks.
For example, when you type –1 in the Volume Adjustment text box, the
various audio level settings across all segments of the marked region of
selected tracks are lowered by exactly 1 dB when you click OK.
Remove Clip Volume on
Track, Remove Pan on
Track
Removes clip volume or pan values from the marked regions of selected
tracks.
Remove Pan/Vols on
Track
Deletes all audio mix adjustments that have been applied to segments in
the marked regions of selected tracks. Each audio clip is restored to its
default pan and volume settings.
Disable Track
Monitoring
Makes an audio track inactive so that it does not process any audio
information.