User Manual

Setting the IP Address
895
connect a controller to a system using an Ethernet cable. You can override these methods of
obtaining IP addresses by supplying a static IP address, which the devices use in all cases when
turned on.
n
Avid does not recommend setting up static IP addresses unless you have experience in
configuring network properties.
To set a static IP address (Avid Artist Control):
1. Press and hold the Page Left and Page Right keys while you press and release the Power
button.
The Network Setup screen appears on the Touchscreen.
2. Touch Use DHCP (Obtain IP Address automatically).
The parameter is deselected, and the Touchscreen displays the IP Address and Subnet Mask
fields.