User Manual

Setting the IP Address
896
3. Touch the first box of the IP Address field to select it, and then adjust its value by turning
any of the eight knobs or the Jog wheel.
4. Repeat the previous step to adjust all values of the IP Address and the Subnet Mask fields.
5. Touch OK to save this static IP address. Turn off the controller and then turn it on to use the
new IP address.
You can touch Cancel at any time to discard changes made to the IP address.
To set a static IP address (Avid Artist Transport):
1. Press and hold the two soft keys on the left while you press and release the Power button.
Hold down the soft keys until the Use DHCP screen appears in the display.
2. Turn the Jog wheel clockwise to change the Use DHCP value from yes (default) to no.
You can use the + (plus) and – (minus) keys instead of the Jog wheel to decrease or increase
the value, respectively.
3. Press the Enter key to move the cursor to the next screen.
4. Do one of the following:
t Use the Jog wheel to set the value of the IP Address field.
t Press the + (plus) key or the – (minus) key on the numeric keypad to increment or
decrement the value. You can also use the numeric keypad to enter the number directly.
5. Repeat step 3 and step 4 to adjust all values of the IP Address and the Subnet Mask fields.
You can press the Enter key to move the cursor forward until the first screen reappears to
change a parameter to a different value.
6. Press the two soft keys on the left at the same time to save this static IP address. Turn off the
controller and then turn it on to use the new IP address.
You can discard changes made to the IP address at any time by turning off the controller
before saving your changes.