User Manual

Configuring EuControl Settings
899
4. Click the Automatically add: menu, and select one of the following:
t To add all controllers listed in the All Surfaces list — which lists all devices available on
your subnet — select All Surfaces. This setting is useful when you are the only person
running EuControl on your network.
t To add only those controllers listed in the My Surfaces, select My Surfaces Only. Since
only one user at a time can control a surface, this avoids claiming surfaces needed by
other users on your network.
The selected devices are connected to EuControl.
5. (Option) If you select My Surfaces Only and you want to specify additional controllers to
connect to your EuControl application, select a controller in the All Surfaces list, and then
click Add.
The controller appears in the My Surfaces list. You can rearrange the order of the controllers
using the up and down arrows, and you can remove controllers from the list using the
Remove button. You can also rename the controller, which allows you to easily identify
multiple controllers in the My Surfaces list.
6. Click the Workstation tab.
The Workstations tab opens. The All Workstations list displays all systems on your subnet
that have been configured for access to the available Artist Series controllers.