User Manual

Core Avid Audio Plug-Ins
943
Parameter Description
Sync When you enable Sync, the delay time synchronizes to the tempo of your audio sequence. When
you disable Sync, you can set the delay time in milliseconds independently of the tempo. The
Sync button is lit when it is enabled.
Delay When you enable Sync, the Delay control lets you select a rhythmic subdivision or multiple of
the beat for the delay time (based on the tempo). Select from the following rhythmic values:
• 16 (sixteenth note)
• 8T (eighth-note triplet)
• 16D (dotted sixteenth-note)
• 8 (eighth note)
• 4T (quarter-note triplet)
• 8D (dotted eighth-note)
• 4 (quarter note)
• 2T (half-note triplet)
• 4D (dotted quarter-note)
• 2 (half note)
• 1T (whole-note triplet)
• 3/4 (dotted half note)
• 4/4 (whole note)
• 5/4 (five tied quarter notes)
• 6/4 (dotted whole note)
• 7/4 (seven tied quarter notes)
• 8/4 (double whole note)
When you disable Sync, the Delay control lets you set the delay time in milliseconds and
seconds (1 ms to 4.00 seconds).
Feedback Lets you adjust the amount of delay feedback. At 0% the delayed signal repeats only once. As
you increase the feedback, the number of times the delay repeats increases. At 100%, the delay
repeats for an extended period of time.
Each Delay mode produces a different feedback pattern, especially when you do not center the
L/R Ratio.