User Manual

Core Avid Audio Plug-Ins
980
Parameter Description
In and Out meters Show peak signal levels before and after EQ processing. Green indicates nominal levels.
Yellow indicates pre-clipping levels, starting at –6 dB below full scale. Red indicates full
scale (clipping) levels.
The clip indicators to the right of each meter indicate clipping at the input of output stage of
the plug-in. Click a clip indicator to clear it.
Input Sets the input gain of the plug-in before EQ processing, letting you make up gain or prevent
clipping at the plug-in input stage.
Input Polarity
control
Inverts the phase (polarity) of the input signal, to help compensate for phase anomalies
occurring in multi-microphone environments, or because of mis-wired balanced
connections.
Output Sets the output gain after EQ processing, letting you make up gain or prevent clipping on the
channel where the plug-in is being used.
Bands The plug-in has separate parameter controls for each of the following 7 bands:
• High-Pass/Low-Notch (HPF)
• Low-Pass/High-Notch (LPF)
• Low Shelf/Low Peak (LF)
• Low-Mid Peak (LMF)
• Mid-Peak (MF)
• High-Mid Peak (HMF)
• High Shelf/High Peak (HF)
Band Enable
button
Toggles the band in and out of the circuit. When a band’s Enable button is highlighted, the
band is in circuit. When a band’s Enable button is dimmed, the band is bypassed.