User Manual

Pro Tools Reference Guide1250
Theater mode provides a 3D room view that can be
rotated.
To rotate the room view in Theater mode:
 Move the cursor over the room view and use the
scroll-wheel to rotate the room up or down. Scroll
all the way down for top-down view.
Indication of Height, Proximity, and
Location in 3D/Theater Mode
Height Adjusting the Height value raises or lowers
the Height plane. See
1 in Figure 4.
Proximity The size of the pan dot indicates prox-
imity (whether the element is closer or further
away relative to the current view). The pan dot ap-
pears smallest when panned furthest away and
largest when panned nearest (see
2 in Figure 4).
Location Pan lines appear on the Height plane to
indicate Left/Right and Front/Rear location. See
3
in in Figure 4.
Screen The Screen image provides a visual refer-
ence for the front room in all views. See
4 in
Figure 4.
Height Mode
Sets the Height mode for the track. Choices include
FreeForm mode (manual height adjustment), and
Wedge, Sphere, and Ceiling modes (automatic height
modes). Height mode can be automated.
To select the Height mode:
 Click a Height mode icon to select that mode.
To toggle Height on/off:
 Click the Height Enable icon. When lit, Height is
enabled (requires FreeForm Height mode).
Height Enable can be automated.
Theater mode, view rotated to “top-down”
Figure 4. Graphic representation of height, proximity,
and location in Theater mode
Height mode and Height Enable
2
3
1
4
Height Mode Height Enable