User Manual

Pro Tools Reference Guide736
8 Click Conform to automatically conform all
clips in the selection.
9 Audition the new conformed clips by clicking
Play in the Transport.
10 Do one of the following:
• If necessary, select
Edit > Undo, and repeat steps
4–8 trying a different set of Conform settings.
• If necessary, apply Edit Smoothing (see “Edit
Smoothing” on page 737).
Groove Conform
Instead of using a grid based on the session’s
tempo map, Groove Conform uses a grid based on
a groove template, or DigiGroove. DigiGrooves
can be used to apply the feel of a captured passage
to the selected audio clips. For information about
creating DigiGroove templates, see “DigiGroove
Templates” on page 731.
To conform clips using Groove Conform:
1 In the Beat Detective window, select Clip
Conform
.
2 Select Groove.
3 In the Edit window, if not already selected, se-
lect the separated clips you want to conform.
Make sure the selection’s start and end points
fall cleanly on the beat.
4 In the Beat Detective window, define or recap-
ture the selection as described in “Defining a
Beat Detective Selection” on page 722.
5 From the Groove Template pop-up menu, select
the
Groove Clipboard or a saved groove tem-
plate (for information on creating groove tem-
plates, see “DigiGroove Templates” on
page 731).
6 To see comments about the selected template,
click
Show Info.
Clips conformed with Beat Detective
Beat Detective, Groove Conform options
When using Groove Conform, the captured
selection must not include Bar|Beat Markers.
Otherwise, the accuracy of the Groove Tem-
plate will be compromised.