User Manual

Pro Tools Reference Guide64
The only limit to output choices is the number of
outputs available in your system.
Pro Tools outputs pairs can also be routed to mul-
tiple audio interface outputs in the Hardware
Setup.
To route a Pro Tools output channel pair to
multiple audio interface output ports:
1 Choose Setup > I/O.
2 Click the Output tab.
3 Click the Output selector for an interface chan-
nel pair, just below an audio interface icon.
4 From the pop-up menu, select a physical port
pair (such as Analog 1–2) to route to the corre-
sponding Pro Tools channel pair (such as A
1–2) in the Path Name column on the left.
5 Control-click (Mac) or Start-click (Windows)
the same Output selector and select an addi-
tional output pair from the same pop-up menu.
The output name updates with a plus sign (“+”) be-
fore it to indicate that multiple output ports are se-
lected. In the pop-up menu, each physical port pair
assigned to that Pro Tools output pair is indicated
by a check mark.
6 Repeat the above steps to select additional
output destinations.
7 Click OK to save changes and close the
I/O Setup.
0utput path assignments can overlap in certain
situations. See “Valid Paths and Require-
ments” on page 75 for details.