User Manual

Chapter 6: I/O Setup 69
Creating New Sub-Paths
You can create sub-paths for main paths in the
Input, Output, Bus, and Insert pages of the I/O
Setup.
To create a new sub-path:
1 Select the page of the I/O Setup where you want
to create sub-paths (such as the Input page).
2 Select the Main path for which you want to cre-
ate sub-paths.
3 Click New Sub-Path.
4 Configure the New Sub-Paths dialog as desired
and click
Create.
5 Click in the Grid to assign the new sub-path
channels to available main path channels.
New Sub-Path Dialog
The New Sub-Path dialog lets you create new sub-
paths for main paths on the Input, Output, Bus, and
Insert pages of the I/O Setup.
5.0 –
6.0 –
7.0
1 Stereo (LR),
5–7 Mono
(one for each
channel)
Stereo: <
main path
name
>.LR
Mono: <
main path
name
>.L, .C, .R,
.Ls, .Rs, and so on
5.1 –
6.1 –
7.1
1 Stereo (LR),
6–8 Mono
(one for each
channel)
Stereo: <
main path
name
>.LR
Mono: <
main path
name
>.L, .C, .R,
.Ls, .Rs, and so on,
and LFE
7.0.2
(Dolby
Atmos
only)
1 each: 7.0, 5.0,
Quad, LCR, Ste-
reo, Overhead
(LR);
and 9 Mono
(one for each
channel)
multichannel sub-
paths: <
main path
name
>.<channel
format>
Mono: <
main path
name
>.L, .C, .R,
.Lss, .Rss, .Lsr, .Rsr,
.Lts, .Rts
7.1.2
(Dolby
Atmos
only)
1 each: 7.1, 7.0,
5.1, 5.0, Quad,
LCR, Stereo,
Overhead (LR);
and10 Mono
(one for each
channel)
Stereo: <
main path
name
>.LR
Mono: <
main path
name
>.L, .C, .R,
.Lss, .Rss, .Lsr, .Rsr,
.LFE, .Lts, .Rts
Default Sub-Paths
Main
Path
Sub-Paths Sub-Path Name
New Sub-Paths dialog for Input main path
Number of new sub-paths
Sub-Path Format Sub-Path Name
Add/Remove Row