Specifications

Avid Fast Track Solo User Guide12
Direct Monitoring
When recording an audio signal into your audio
software, there is often a slight delay before it
reaches the outputs of the software and Fast Track
Solo. This delay, called latency, is caused by the
computer processing required to convert and re-
cord audio. Since this delay can be distracting, Fast
Track Solo provides a direct monitoring path from
the inputs to the outputs, which is activated by
pressing the Direct Monitor button.
When Direct Monitoring is enabled, the input sig-
nal is mixed with the output signal from your audio
software, and routed directly to the Line and Head-
phone outputs. This lets you hear the “live” inputs
without latency.
The Direct Monitor button has no effect on what is
being recorded by your software. When using the
Direct Monitor feature, make sure any software
monitoring option for direct (or “low latency”)
monitoring is disabled. Disabling Low Latency
monitoring prevents “double-monitoring” of input
audio signals when using the Direct Monitoring
feature.
When “double-monitoring” occurs, there will be
an increase in volume and an undesirable “phas-
ing” sound. For more details about its monitoring
function, refer to the documentation for your audio
software.
Sample Rate, Bit Depth, and
Buffer Size
Fast Track Solo can operate at two sample rates
(44.1 kHz or 48 kHz) and two different bit depths
(16 bit or 24 bit) to accommodate a variety of proj-
ects. You should decide on a sample rate and bit
depth for your project before recording, to maxi-
mize fidelity and avoid time-consuming format
conversions.
Choosing Sample Rate and Bit
Depth
The following guidelines should help you choose
appropriate sample rate and bit depth settings for
your recording:
Music Projects
If the final mix will be played back on CD, or in
MP3 format, a 24-bit resolution with a sample rate
of 44.1 kHz is recommended.
Video Projects
If the final mix is intended for DVD, film or TV, a
24-bit resolution with a sample rate of 48 kHz is
recommended.
The final output file will have to be converted
to 16 bit/44.1 kHz for playback on CD and
some audio player applications.
It is not possible to raise the fidelity of
previously recorded audio by increasing its
bit depth or sample rate.
Always use the highest possible settings that
are appropriate for your project.