Installation manual

4-4 AUX Pages
COM PRESETS
The “Com Preset List” LSK can be used to nominate one of up to
16 selected preset frequencies into the #1 Standby com radio
slot. If the aircraft has been wired to provide a cockpit control
(e.g. dedicated com preset button on the yoke), then loading the
preset frequencies into the #1 Standby can be done from any
page by using that cockpit control.
Com Presets Page
To load a com frequency into a com preset slot, first put the page
into edit mode by selecting the “Edit” box in the top right corner by
either touching it or using the bottom right IFD knob to highlight
and push the knob in. The box will turn dark blue to indicate the
page is in edit mode.
Once in edit mode, select the desired slot for the preset
frequency by either touching it or by using the bottom right IFD
knob. Once that slot has been highlighted, either touch it a 2
nd
time to generate a numeric keypad and type in the desired
frequency (must type in full frequency including the decimal point,
“121.7”) or use a combination of twists and pushes of the bottom
right IFD knob to enter the desired frequency.