Installation manual

4-12 AUX Pages
ELECTRONIC CHECKLIST
Up to 9 custom checklists can be created and stored in the IFD
via the “Checklist” LSK of the UTIL tab, each with up 30 steps.
Each step can be up to 30 characters long.
Creating a Checklist
The first step is to create a checklist directory (list of named
checklists to be created). From the “Checklist” LSK, put the
system into checklist edit mode by highlighting the “Edit” box in
the top right corner of the page, either by touching it or using the
bottom right IFD knob to highlight the box. The edit box will be
displayed with a blue background and presents a numbered blank
row when it is in edit mode.
When the system is put into checklist edit mode, the light blue
wraparound cursor needs to be manually placed on the next
available line in the checklist directory by touching the line or
using the bottom right IFD knob. Then touch the row in the
directory list a second time or push the bottom right IFD knob to
generate a keypad for checklist naming.
Creating a Checklist Directory
When you have finished naming the new checklist, press the
“Enter” button on the keypad or push the right IFD knob. Repeat