Installation manual

1-10 System Overview
START-UP SEQUENCE
The startup sequence of the IFD is as follows:
A splash screen will be displayed during system
initialization and will be automatically removed
when the IFD is initialized. The Page Function
keys (e.g. FMS, MAP, AUX) will not be lit up while
the splash screen is present;
An agreement of the limitation of your legal rights
must be made via the bezel “ENTR” button. Note:
For the duration that the agreement page is
displayed, the IFD is activating the signals that
connect with a remote annunciator panel as well
out outputting self-test data to external devices.
Use that condition as a lamp test and external
signal check;
A software version and database currency page is
displayed IF there any expired databases.
Avidyne does not recommend operating with
expired databases but the system will allow
operation by pressing the “Proceed” followed by
the “Confirm” LSKs;
If there is a fuel flow system connected to the IFD,
then the IFD will automatically transition to the
Fuel Management Page. If the fuel flow system
does not provide fuel totalizer data, you will need
to input the fuel on board and press the “ENTR”
key. If the fuel flow system does provide fuel
totalizer data, confirm the total is correct and press
the “ENTR” key.
If there is no fuel flow system connected, then the
unit progresses directly to the FMS page and FPL
tab, in principle ready for a flight plan to be loaded
or verified;
The IFD is now ready for normal use.
The agreement page, database expiration and fuel management
entries are all skipped if the unit is powered on in-flight.