Installation manual

5-10 Navigation
VOR COURSE DEPICTION
When the Nav Source on the IFD is VLOC and the IFD is tuned to
a VOR station, the IFD will display the in-bound and out-bound
radials as dialed in by the OBS/Course knob on the external
indicator, if that external device is capable of transmitting course.
The radial lines will be displayed once the VOR station is
decoded and will be 50 nm long.
The line will be green for the in-bound course/radial to the VOR
when the aircraft position is on the near side of the perpendicular
course (“To” geometry) and the out-bound course/radial will be
white.
The line will be green for the out-bound course/radial to the VOR
when the aircraft position is on the far side of the perpendicular
course (“From” geometry) and the in-bound course/radial will be
white.
VOR Course Depiction