Installation manual

System Overview 1-23
When the desired waypoint is displayed, press the knob in
to accept;
Touch the waypoint field in the pop-up green Direct-To
dialog box to generate a virtual keyboard and type in the
desired waypoint name. When the desired waypoint is
displayed, press Enter on the keypad or bezel to accept;
Twist the inner ring of the lower right IFD knob while the
pop-up green Direct-To dialog box is displayed to go into
edit mode. The inner ring changes the character and the
outer ring changes the cursor position in the waypoint name
field. It may not be necessary to fill in all letters of the
waypoint name since they will auto-fill. When the desired
waypoint is displayed, press Enter on the keypad or bezel
to accept.
FUNCTION KEYS
In addition to the Direct-To and Frequency List function keys that
have already been described, the IFD has a Nearest (“NRST”)
function key and an Enter (“ENTR”) function key and a Clear
(“CLR”) function key that perform the following functions:
Nearest – Simultaneously jumps to a Nearest
page (if not already there) and presents a list of
the nearest airports to your present position. Each
additional press of the “NRST” function key
changes the nearest list to another category as
defined in the list below:
o Nearest Airports
o Nearest Airports to Destination
o Nearest VORs
o Nearest NDBs
o Nearest Intersections
o Nearest ARTCCs
o Nearest FSS
o Nearest Airspace
o Nearest User Waypoints