Installation manual

2-10 FMS Pages
TIPS AND TECHNIQUES
Back-to-Back Duplicate Waypoints Restriction
The FMS will not permit entering back-to-back
duplicate waypoints. A duplicate waypoint can be
inserted elsewhere in the active flight plan (e.g.
“above” the active approach or as a dummy
waypoint “below” the published missed approach
waypoints.) if this becomes operationally required
during a flight scenario.
DELETING A WAYPOINT
From the FPL tab, use the bottom right knob on the IFD to scroll
up and down the flight plan until the edit cursor surrounds the
waypoint to be deleted. Press the “CLR” button on the right side
of the bezel to delete the waypoint. Continue pressing the “CLR”
button and it will walk up the flight plan deleting earlier waypoints
as you go. Waypoints can also be deleted by touching the
waypoint to be deleted and then selecting the L4 “Delete
Waypoint” LSK.
EDITING A WAYPOINT
From the FPL tab, the bottom right knob on the IFD can be used
to edit an existing waypoint. Using the knob, scroll up or down the
flight plan until an edit cursor surrounds the waypoint to be
modified. Use the inner ring of that knob to highlight one of the
editable fields with reverse video. Pushing the knob provides a
drop down box from which the changes can be made.
Alternatively, touching the field to be edited will display a virtual
keyboard which can be used to enter the desired data/changes.