Installation manual

2-34 FMS Pages
WPT (USER WAYPOINTS) TAB
The WPT tab will list all user waypoints in the IFD. Up to 600
user waypoints can be stored and accessed on this page.
User Waypoints Tab
CREATING A USER WAYPOINT
There are 4 methods of creating a user waypoint from the “WPT”
tab of the FMS page:
Present Position – Press the “PPOS” LSK to
create a waypoint with your current position. No
further action is required.
Enter Lat/Lon – Press the “New” LSK then press
the “Format” LSK until the “Lat/Lon” option
appears and enter in your desired coordinates
either by touching the coordinate field and then
using the virtual keyboard or by using a
combination of twists and pushes of the bottom
right IFD knob to enter the coordinates. Press the
“Enter” LSK to save that new waypoint.
Enter Radial/Radial (an intersection of two
radials) – Press the “New” LSK then press the
“Format” LSK as required to select the “Rad/Rad”