Installation manual

Map Pages 3-1
3 Map Pages
This section covers the Map page tabs including the map and
chart display modes and controls, terrain awareness and alerting,
and weather datalink.
MAP TAB
The map has several formats and views. There is both a full map
depiction as well as a datablock map depiction. In both cases,
you have the ability to control the map feature density as well as
the various overlays, all via the LSKs along the left edge of the
display.
The active FMS flight plan is always overlaid on the map as are
any traffic depictions.
COOL FEATURE
Next Leg Depiction on Map
While the current leg of the active flight plan is
always depicted in magenta on all moving maps,
we’ve added an indication of the next leg using
alternating magenta and white stripes. This “candy
cane” indication can come in handy during such
circumstances as teardrop entries into a hold
pattern. It gives you a clear indication of what the
system will do next. All future legs beyond the next
leg will be depicted in white.
MAP CONTROLS
Turning the bottom right IFD knob (inner or outer ring) or using
“pinch zoom” touch gestures will result in a map range change.
Map range choices extend from 2 nm up to 1000 nm. Current
map range is indicated on the outer map range ring at
approximately the 1:30 position and as noted above, the map
range can be adjusted by either twisting the bottom right IFD
knob or by using a two-fingered pinching gesture on the touch