Installation guide
the installation is complete.
Mounting the Dome Camera
Perform the following steps to mount the dome camera to the ceiling or wall:
1. Use the drill template to drill four mounting holes and one cable entry hole in the ceiling or wall.
2. Pull the cables through the cable entry hole in the ceiling or wall, then through the cable entry hole in the
dome camera.
3. Drive four screws into the mounting holes to fasten the dome camera to the ceiling or wall.
WARNING — Only use UL listed mounting brackets suitable for the mounting surface and can sustain a
minimum 0.60kg (1.2lbs)..
CAUTION — This camera is designed for indoor use only.
Figure 1: Dome camera installation
Mounting the Dome Camera 7