Avigilon Control Center System Integration Guide with DSX Access Systems INT-DSX-A-Rev3
Copyright © 2013 Avigilon. All rights reserved. No copying, distribution, publication, modification, or incorporation of this document, in whole or part, is permitted without the express written permission of Avigilon. In the event of any permitted copying, distribution, publication, modification, or incorporation of this document, no changes in or deletion of author attribution, trademark legend, or copyright notice shall be made.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Avigilon Control Center System Integration Guide with DSX Access Systems Introduction The Avigilon DSX integration allows you to see live and recorded video from the Avigilon Control Center System in the WinDSX software. Requirements Vendor Requirements Avigilon Control Center Server Software 4.0.2.4 and later. Avigilon Avigilon 3rd party licence: ACC-DSX-NVR Avigilon Avigilon DSX integration zip file: AvigilonDSXIntegration.zip The file can be downloaded at http://avigilon.
Avigilon Control Center System Integration Guide with DSX Access Systems Installation Server • Each server using the Avigilon DSX Integration requires a licence from Avigilon. Add the DSX Access Systems Integration NVR licence (ACC-DSX-NVR Licence) to each Avigilon server that is to be integrated with the WinDSX software. • On one server in the WinDSX system, install the USB Software Features Key.
Avigilon Control Center System Integration Guide with DSX Access Systems Configuration Assigning Logical IDs to Cameras In the Avigilon Control Center Client software, assign a logical ID to each camera. The WinDSX software will only detect cameras with a logical ID. By default, cameras do not have a logical ID. 1. In the Avigilon Control Center Client software, right-click a camera in the System Explorer and select Setup. 2. In the camera Setup dialog box, click General. 3.
Avigilon Control Center System Integration Guide with DSX Access Systems 8. In the following Assign Cameras field, enter the logical ID that was assigned to the camera in the Avigilon Control Center Client software. See Assigning Logical IDs to Cameras on page 3. You can assign more than one camera to a camera profile, and a camera can be added to more than one profile. • To add multiple cameras to a profile, enter the camera’s logical ID followed by a common then the next logical ID etc. 9.
Avigilon Control Center System Integration Guide with DSX Access Systems Using the Integration After the integration has been installed and configured, you can access live and recorded video from Avigilon cameras through the WinDSX software. For more information, see the DSX DVR/ NVR Integration manual.
