Avigilon Control Center System Integration Guide with RS2 Access It!® INT-RS2-A-Rev3
Copyright © 2013 Avigilon. All rights reserved. No copying, distribution, publication, modification, or incorporation of this document, in whole or part, is permitted without the express written permission of Avigilon. In the event of any permitted copying, distribution, publication, modification, or incorporation of this document, no changes in or deletion of author attribution, trademark legend, or copyright notice shall be made.
Table of Content Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Avigilon Control Center System Integration Guide with RS2 Access It! Introduction The Avigilon RS2 integration allows you to see live and recorded video from the Avigilon Control Center System in the RS2 Access It! software. Requirements Vendor Requirements Avigilon Control Center Server Software 4.0 and later. Avigilon Avigilon 3rd party licence: ACC-RS2-NVR Avigilon Avigilon RS2 integration zip file: AvigilonRS2AccessITIntegration.zip The file can be downloaded at http://avigilon.
Avigilon Control Center System Integration Guide with RS2 Access It! Installation Server • Add the RS2 Integration NVR licence (ACC-RS2-NVR) to each Avigilon server that is to be integrated with the Access It! software. Client • Add the RS2 DVR integration client license on each workstation that would access the integration. • Unzip a copy of the integration file in each integration workstation. • Install Microsoft .NET Framework 3.5 redistributable on each workstation using the Avigilon RS2 Integration.
Avigilon Control Center System Integration Guide with RS2 Access It! Configuration Assigning Logical IDs to Cameras In the Avigilon Control Center Client software, assign a logical ID to each camera. The Access It! software will only detect cameras with a logical ID. By default, cameras do not have a logical ID. 1. In the Avigilon Control Center Client software, right-click a camera in the System Explorer and select Setup. 2. In the camera Setup dialog box, click General. 3.
Avigilon Control Center System Integration Guide with RS2 Access It! Adding the Integration to Access It! In the Access It! software, add the Avigilon Control Center system to the hardware tree. Once added, you can associate cameras in the Avigilon system to events and alarms in the Access It! software. 1. In the Access It! software, right-click DVR’s in the hardware tree and select New. 2. Select the RS2 Universal DVR Viewer option then click OK. 3. Give the DVR a name. 4. Click [...
Avigilon Control Center System Integration Guide with RS2 Access It! Using the Integration After the integration has been installed and configured, you can view live and recorded video from cameras in the Avigilon Control Center system through the RS2 Access It! software. You can also associate video to events and alarms through the integration. For more information, see Access It! Universal Users Manual.