Owner`s manual

Assembly
3
1
Slide large washer, onto the axle as shown.
2
Locate a wheel marked front. Slide the wheel onto the axle
with the word front facing in, toward the vehicle.
3
Align the four posts on the back of the wheel cover with the
holes in the wheel and slide the wheel cover into the wheel.
4
5
Align the pins in the hubcap with the holes in the wheel cover
and press in place
Note: Do not use a hammer. Repeat steps 1-5 to attach both
front wheels.
Front Wheel
Large
washer
Wheel
Wheel cover
Nut
Hub cap
Small
washer
1
2
3
4
5
Slide a small washer and then the nut onto the axle. Tighten
the nut until you can see about two threads on the axle. Do
not overtighten.