Operation Manual

31
You can choose the desired chamber temperature by using the “ / ”. buttons. The temperature
selected increases/decreases by 1°C with each button press.
Temperatures of between 5 and 18°C can be selected. Once the desired temperature has been selected, the
display will flash for 5s before showing the current internal cooler temperature. The set temperature can be
viewed at any time by pressing and holding the temperature select buttons for 5s.
AV53CDZ/CV52IXDZ/AV54SXDZ(-IX)
 Light
Lighting control button
 RUN
Power indicator
 Power
On/Off switch (press and hold for 3s)
 “Set Upper” Button
Upper chamber temperature setting button.
 “Set Lower” Button
Lower chamber temperature setting button.
 “Upper Chamber”
Upper chamber electronic display
 “Lower Chamber”
Lower chamber electronic display
Press “Set Upper” to adjust the upper chamber temperature.. The relevant chamber display will start to flash and
each press on the button will alter the temperature by 1°C. Once the lowest set temperature of 5°C is reached,
the display automatically changes to the highest set temperature of 10°C. Once selected, the display will flash for
approximately 5s before showing the current internal temperature of the cellar. The set temperature can be
viewed at any time by pressing and holding the temperature select buttons.
Press “Set Lower” to set the upper chamber temperature.. The relevant chamber display will start to flash and
each press on the button will alter the temperature by 1°C. Once the lowest set temperature of 10°C is reached,
the display automatically changes to the highest set temperature of 18°C. Once selected, the display will flash for
approximately 5s before showing the current internal temperature of the cellar. The set temperature can be
viewed at any time by pressing and holding the temperature select buttons.
In the event of a power cut, all previously selected temperature settings will be deleted and each chamber will re-
initialise to the factory-preset temperature of 6°C for the upper chamber and 12°C for the lower chamber.
The set temperature can be viewed at any time by pressing and holding the temperature select buttons for 5s.