User`s manual

E-14
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Remote Control)
1. ON/STANDBYButton
 Switches the power of the projector on or off (standby
mode).
• Onlythisbuttoniseffectivewhentheprojectionlampisoff.
See Page E-23.
2. MUTEButton
Temporarily blanks the projection screen without switching
off the lamp. One more press causes the screen to return
immediately.
See Page E-32.
3. VOLUMEButtons
These buttons adjust the volume when the PC or video is
selected.
In addition, during the display of one history image, VOL-
UME + button advances the page, and the VOLUME – but-
ton moves back one page.
See Page E-31.
4. BRIGHTNESSButtons
These buttons adjust the brightness of the projection
screen.
See Page E-27.
5. ZOOMButtons
These buttons adjust the magnification of the projection
screen.
See Page E-26.
6. MENUButton
Switches on or off the display of the menu screen.
See Page E-35.
7. SCROLLButtons
Sets the selection of the item or the adjustment value at the
menu screen. Moves the zoom position during a zoom dis-
play. Moves the pointer when the pointer is being displayed.
See Pages E-26, 27, 29 and 32.
8. SET/POINTERButton
During menu display, this button advances the menu to
the next level. This button nalizes the setting at the time
of item selection. See Page E-34. This button displays a
pointer when the menu screen is not displayed. Press this
button one more time to make the pointer disappear.
9.ROTATIONButton
When OHP is selected, the orientation of the projection
screenswitchesto0°andto90°.Screensthathavebeen
switched over are displayed to match the width.
See page E-25.
10.FREEZE/CAPTUREButton
Makes the projection screen image into a still image.
 WhenOHPisselected:DatawillbesavedtoUSBmemory
when a USB memory stick is inserted.
* When the USB memory stick is not inserted, the image
cannot be stored because only still images are dis-
played.
* Only for iP-01UE.
See Page E-28.
11.FREEZEOFFButton
Cancels the still image mode.
This is used when checking the projection screen while
moving the document.
See Page E-29.
12.OHPButton
Switches the projector to OHP input. See Page E-25.
13.PCButton
Switches the projector to PC input. See Page E-25.
14.VIDEOButton
Switches the projector to video input. See Page E-25.
15.THUMBNAILButton
Still images that have been captured on a USB memory
stick are displayed as thumbnails.
See Page E-29.
* Only for iP-01UE.
1
3
4
6
11
12
13
14
5
2
9
10
15
7
8