User`s manual

E-16
0 - 6°
Procedure Up to Projection
1
Considerationofplacementlocationandscreensize
Determine the screen and projector setup location.
Set the projector on a strong and stable, level platform.
2
Connectionswithinputequipment
Connect your personal computer/video equipment.
Connections with the Personal Computer
→
See Page E-18
Connections with the Video Equipment
→
See Page E-22
3
Connectthepowercableandswitchonthepower
Switch On the Power
→
See Page E-23
Switch Off the Power
→
See Page E-23
4
Switchonthepowerofthepersonalcomputerorvideoequipment
5
Properly adjust the projection image
tothescreen
→
See Page E-17
6
Selecttheinputequipment
→
See Page E-25
7
Adjusttheimageorvideo
Adjust the image to provide the optimum condition, as required.
→
See Page E-42 - E-43
See Page E-17 for information about the projection distance and screen size.
Performthetiltadjustmentoftheprojectortoprovidethedesiredprojectionheight.
The tilt adjustment allows the position of the projection image to be raised and lowered. The adjustment angle is from 0 de-
grees to 6 degrees.
Tilt adjustment
→
See Page E-24
0 - 6°