User`s manual

E-32
Regular Operation
Displaying the Pointer
This operation displays the pointer in the currently projected image.
Deleting the Projection Image and Audio
This operation deletes the currently projected image and audio without switching off the lamp.
OperationwiththeProjector
The ability to delete the projection image is not available from
the operation panel of the projector.
OperationwiththeRemoteControl
Press the MUTE button.
OperationwiththeProjector
The ability to turn on and turn off the pointer is not
available from the operation panel of the projector.
OperationwiththeRemoteControl
Press the SET/POINTER button.
One more press of the SET/POINTER button while the
pointer is displayed will turn off the pointer display.
Moving the Pointer
OperationwiththeProjector
Scrollingisnotpossiblefromthemainunit’scontrolpanel.
OperationwiththeRemoteControl
PresstheSCROLL(▲▼◀▶)buttons.
See Page E-38 for information about the form, color, and size of the pointer.
NOTE:
If the brightness is adjusted while the pointer is displayed, the pointer disappears temporarily, but it reappears once the
brightness adjustment bar turns off.
DuringKeystonecompensation(trapezoidalcompensation),whenthepointerisdisplayed,thepointercolormaybecomestriped.
It is not a failure.
Note that the pointer cannot be displayed during still image conditions of the PC/Video mode.
NOTE:When a xedperiod of time elapses (about 30 minutes) with the video/audio muted,amessagewill be displayed to
checkwhethertoshutdowntheprojector.Selectionof"Yes"willsettheprojectortothestandbymode,whileaselectionof"No"
will again delete the video/audio.
When there has been an absence of an operation for 30 seconds during the display of the above conrmation message, the pro-
jector automatically enters the standby mode.