User`s manual

E-33
Method of OHP Operation
The maximum reading size of documents and printed mate-
rial is 216 mm high by 288 mm wide.
Consequently, whenA4paper(210mmhighand297.5mm
wide)isplacedontheprojector,readingwillbeasillustrated
inthediagrambelow(whichdepictstheareathatcanbepro-
jectedastheportionwithdiagonallines).
Attaching the Document Cover
The mounting orientation of the document cover can be
changed to the opposite direction in accordance with the cir-
cumstances circumstances.
Preparation of the Projection Document
Thedocument(printedmaterial)thatistobeprojectedisplacedontheprojectorasillustratedinthediagrambe-
low and the document cover is closed.
NOTE:
• Thedocumentcanbeprojectedevenwhenthedocumentcoverhasnotbeenclosed;however,inthisinstance,unnecessary
items may be projected which will make the image difficult to view.
• Whenshinypaperlikemagazinecoversorblackpaperisplacedontheprojector,theinternaluorescentlightbulbmaybe
reectedinit,makingtheedgesoftheprojecteddocumenthardtosee.
Reading Size of Projection Documents
OtherfunctionsthatareusedintheOHPoperationcanbeseenonthefollowingpages:
●
Switching the input to OHP
→
See Page E-25
●
Changing the projection image to a still image display
→
See Page E-28
●
Capturing a projection image
→
See Page E-28
●
Viewing captured images
→
See Page E-29
NOTE:When removing the document cover, lift the cover by
both hands and remove it.
HorizontaldocumentTopside
Verticaldocument
Topside
The portion that falls outside of the reading range will not be projected;
therefore, shift the paper as required.
* When a heavy photographic object is placed, the reading size may be
reduced slightly.
A4 Paper
297mm(Papersize)
288mm(Readingsize)
216mm(Readingsize)
210mm(Papersize)