User`s manual

11
Names and Functions of the Parts (Input Connectors)
1
23 5
6
78 9
4
A Check of the Supplied Items and the Names of the Parts
1. USB connector
This connector is used for USB connections with a personal
computer.
Please see the "iP Viewer Software User's Manual".
2. Audio Output
Audio output terminal for iP-750E.
This terminal outputs audio (either from the PC or video
source) that is currently being input. In the standby mode,
PC audio is output. When OHP input is selected, PC audio is
output.
See Page 21.
3. S-VIDEO Input
Input terminal for video source (Y/C).
See Page 21.
4. Video Source Video Input
Input terminal for video source (NTSC/PAL/SECAM).
See Page 21.
5. Video Source Audio Input
Audio input terminals for a video source (stereo compatible).
See Page 21.
6. PC Audio Input
Audio input terminal for a PC (stereo compatible). Two per-
sonal computers can be connected. See Page 17.
7. Test (maintenance) connector
This special connector is used at the time of maintenance
and factory tests. It cannot be used for other connections.
8. RGB Video Output
When OHP is selected, OHP images are output. When PC/
VIDEO input is selected, input PC video is output as it is.
During standby, RGB-IN1 images that are input from the
personal computer are output directly. See Page 17.
9. PC Video Input
Input terminal for the PC analog RGB signals. Two per-
sonal computers can be connected. See Page 17.