User`s manual

13
Names and Functions of the Parts (Remote Control)
1. POWER Button
Switches the power of the projector on or off (standby mode).
• Only this button is effective when the projection lamp is
off.
See Page 22.
2. MUTE Button
Temporarily blanks the projection screen without switching
off the lamp. One more press causes the screen to return
immediately.
See Page 30.
3. MENU Button
Switches on or off the display of the menu screen.
See Page 33.
4. FREEZE OFF Button
Cancels the still image mode.
This is used when checking the projection screen while mov-
ing the document.
See Page 28.
5. FREEZE/CAPTURE Button
Makes the projection screen image into a still image. In the
OHP mode, the image is stored in internal memory as a
thumbnail.
See Page 27.
6. SET/POINTER Button
During menu display, this button advances the menu to the
next level. This button finalizes the setting at the time of item
selection. See Pages 30 and 33. This button displays a pointer
when the menu screen is not displayed. Press this button
one more time to make the pointer disappear.
7. SCROLL Buttons
Sets the selection of the item or the adjustment value at the
menu screen. Moves the zoom position during a zoom dis-
play. Moves the pointer when the pointer is being displayed.
See Pages 25, 26, 29 and 30.
8. ZOOM Buttons
These buttons adjust the magnification of the projection
screen.
See Page 25.
9. RESIZE Button
• Press to change the size of the projected image when
OHP is selected.
• Press to do automatic synchronous adjustments when PC
is selected.
See Page 26.
10. PORTRAIT Button
Selects the orientation of the projection screen. The display
of the switched screen is adjusted to match the width.
See Page 24.
11. BRIGHTNESS Buttons
These buttons adjust the brightness of the projection screen.
See Page 27.
12. VOLUME Buttons
These buttons adjust the volume when the PC or video is
selected.
See Page 29.
13. OHP Button
Switches the projector to OHP input. See Page 24.
14. PC1/PC2 Button
Switches the projector to PC input. See Page 24.
15. VIDEO Button
Switches the projector to video input. See Page 24.
16. THUMBNAIL Button
Displays the captured still image as a thumbnail.
See Page 28.
1
4
6
8
9
11
13
16
2
10
12
5
3
14
15
7
A Check of the Supplied Items and the Names of the Parts