AVIOM16/ o -Y1 A-Net Output Card for Yamaha Digital Mixers AVIOM16/o-Y1 Mode 1 2 3 4 5 6 Stereo Link 7 8 9 Dn/Up - Aviom Up/Dn - 16 ch Up/Up - 8 ch Dn/Dn - Test 10 A-Net Out Made in USA U ser G uide
A-Net and the A-Net logo are trademarks of Aviom, Inc. Aviom and the Aviom logo are trademarks of Aviom, Inc. Pro16 is a trademark of Aviom, Inc. All other trademarks are property of their respective owners. Information in this document is subject to change. All rights reserved. Copyright ©2006 Aviom, Inc. Printed in USA Document Rev. 1.
! Warning Failure to observe the following warnings may lead to risk of serious injury from fire or electric shock. Before installing the card, you must refer to the owner’s manual of the host device or to the Yamaha website to verify that your host device supports this card, and to verify the number of cards that can be installed in combination with other Yamaha or third-party cards. • Do not attempt to disassemble or modify the card.
WARNING! ! NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY • To reduce the risk of fire or electrical shock, do not expose this product to rain or other types of moisture. • Operating Temperature: 10˚C to 40˚C (50˚F to 105˚F) CAUTION: • Using any audio system at high volume levels can cause permanent damage to your hearing. • Set your system volume as low as possible. • Avoid prolonged exposure to excessive sound pressure levels.
Warranty Information Please record the following information for future reference: Your Authorized Aviom Dealer: Name: _____________________________ Address: _____________________________ _____________________________ Phone: _____________________________ Serial Number of Your Aviom Product: ___________________ Date of Purchase: ________________ Your Authorized Aviom Dealer is your primary source for service and support.
Aviom, Inc. Limited Warranty Aviom, Inc. warrants this product against defects in materials and workmanship for a period of one year from the date of the original retail purchase. This warranty does not apply if the equipment has been damaged due to misuse, abuse, accident, or problems with electrical power. The warranty also does not apply if the product has been modified in any way, or if the product serial number has been damaged, modified, or removed.
Welcome Thank you for purchasing the AVIOM16/o-Y1 A-Net® Output Card for Yamaha® Digital Mixers. This User Guide is designed to familiarize you with your new product and to have you up and running in no time. Features The AVIOM16/o-Y1 interface card (or “Y1” card for short) provides a host of professional features designed to make using A-Net Pro16™ monitoring products flexible and easy to configure in a variety of professional audio situations.
Y1 Card Components AVIOM16/o-Y1 Mode 1 2 3 4 5 6 7 8 9 Dn/Up - Aviom Up/Dn - 16 ch Up/Up - 8 ch Dn/Dn - Test 10 Stereo Link A-Net Out Made in USA 1 1 2 3 4 5 2 3 4 5 Thumb Screws DIP Switch - Stereo Link DIP Switch - Mode Selection A-Net Output Locking EtherCon RJ45 connector with release tab Installing the Y1 Card The Y1 card can be used in any expansion slot in the Yamaha mixing console. The number of available expansion slots varies with each model.
expansion port to expose the expansion connections. • Remove the Y1 card from its protective anti-static sleeve. • Slide the Y1 card into place, aligning the sides of the card with the support guides in the expansion slot. • Press the Y1 card firmly in place to attach the multipin card connectors on the Y1 card and Yamaha mixer. • Attach the Y1 card permanently by tightening the two thumb screws on the rear panel of the Y1 card.
The DIP switch 1 to 8 definitions are as follows: • Switch 1 - controls channels 1 and 2 • Switch 2 - controls channels 3 and 4 • Switch 3 - controls channels 5 and 6 • Switch 4 - controls channels 7 and 8 • Switch 5 - controls channels 9 and 10 • Switch 6 - controls channels 11 and 12 • Switch 7 - controls channels 13 and 14 • Switch 8 - controls channels 15 and 16 Mode 1 2 3 4 5 6 7 8 9 10 Stereo Link The example above shows a configuration where channel pairs 3-4, 13-14, and 15-16 are set for
related to the expansion card. Note: Not all Yamaha mixers are compatible with Aviom Mode. Software and firmware updates to the Yamaha console may be required. Consult Yamaha Customer Service and/or your mixer’s documentation for additional details. Switch 9 Off and Switch 10 On – MY16-AT Mode Mode 1 2 3 4 5 6 7 8 9 10 Stereo Link Yamaha 16-channel capability mode. The Yamaha console recognizes the Y1 card as a generic 16-channel expansion card.
products designated as 8-channel devices. Consult the Yamaha mixing console’s documentation for additional information about 8-channel compatibility. Switch 9 On and Switch 10 On – Test Mode Mode 1 2 3 4 5 6 7 8 9 10 Stereo Link ! In Test Mode, channels 1 through 4 output a 1kHz, 48k sample rate sine wave. This mode can be used to troubleshoot an audio system. Make sure to set the Yamaha console’s internal sample rate to 48k when using Test Mode.
Compatibility The Y1 console interface card, when installed and properly configured in a Yamaha digital mixing console system, is compatible with the following Aviom Pro16 Series products: • A-16II Personal Mixer (the original A-16 is not supported) • A-16R rack-mounted Personal Mixer • AN-16/o Output Module • A-16D A-Net Distributor • A-16D Pro A-Net Distributor Connecting Pro16 Devices With the Y1 card properly installed and configured, you can now connect Pro16 monitoring and audio networking devices.
Parallel Connections Parallel connections avoid some of the pitfalls of a serially-connected system. Each A-Net device is directly connected to a data source instead of depending upon the previous user in a daisy chain for data delivery.
Cables Used With A-Net Devices Aviom suggests using Category 5e (Cat-5e) or better cables when making A-Net connections between devices (maximum cable run of 500 feet, 150 meters). The Ethernet specification requires the use of Unshielded Twisted Pair (UTP) cables for all interconnections for best performance. All Aviom A-Net products require unshielded Cat-5e cables. Category 6 (Cat-6) cables can also be used. Do not use shielded Cat-5e cables with A-Net devices.
Index Symbols 10-position DIP switch 7 16-channel 5, 9 24-bit 12 48kHz 12 8-channel 9 PM1D 5 A A-16 original version 11 A-16D Distributor 11 A-16D Pro A-Net Distributor 11 A-16II Personal Mixer 11 A-16R Personal Mixer 11 A-Net 12 A-Net, long distance 13 A-Net Distributor 11 A-Net In 11 A-Net Out 11 A-Net Output 6 A-Net Pro16 12 A-Net signal repeater 13 AC power cable 1 AN-16/o Output Module 11 Aviom Mode 8 B boot-up console 8 computer network 13 Connecting Pro16 Devices 11 connections, A-Net serial, para
MY8-AT Mode 9 Y N Y1 5 Yamaha expansion port 7 networking products 13 O Operating Temperature 2 P Parallel 12 Personal Mixers 7 PM1D 5 MY8-AT Mode 9 power cable AC 1 Pro16 5 Pro16 Series 11 R repeater A-Net 13 router, switch 13 S sample rate 10, 12 Series 11 shielded Cat-5e cable 13 signal repeater A-Net 13 sine wave 10 slots 6 stereo link 7 T Test Mode 10 U Unshielded Twisted Pair 13 UTP 13 W Warranty 3, 4 15
Aviom Warranty Registration Please take a moment to fill in this warranty registration form. Return it to Aviom via mail or fax. All information will be kept confidential. Model Number ................................ Serial Number ................................ Model Number ................................ Serial Number ................................ Model Number ................................ Serial Number ................................ Model Number ................................
Aviom, Inc. 1157 Phoenixville Pike Suite 201 West Chester, PA 19380 www.Aviom.
