Instruction Manual

16re A r PA N e l Fe A t u r e s
Rear Panel Features
All ASI rear‑panel features and functions are described in this section.
AC Power
Pro64 modules use switching power supplies that can operate at 100‑240V,
and from 50‑60Hz, meaning that they can be used with most of the world’s
AC power systems by simply changing the line cord. The ASI is equipped
with a standard grounded IEC power inlet (with fuse) which can accept the
interchangeable IEC power cord.
The ASI uses a standard detachable IEC power cable. The AC inlet also
contains the fuse compartment.
Fuse
The fuse holder is spring‑loaded and has space for two fuses, one main and
one spare (optional). Press the fuse holder cover to access the fuse. When
checking or replacing a fuse, always power off the Pro64 unit and remove
the line cord from the AC power source.
Always replace the fuse with one of the same rating as that being changed.
A-Net Ports
Six EtherCon jacks are provided for A‑Net connections, two bidirectional
Pro64 I/O ports and four Pro16 outputs. Connections can use standard RJ45‑
style cables or cables outfitted with the locking Neutrik EtherCon connector.
Pro64 Ports
Two Pro64 A‑Net ports are provided, labeled A and B. The actual functionality
of the Pro64 ports is determined by the current network mode (Auto or
Manual) and the setting of the Manual Mode configuration when using
Manual Mode.