Manual

32D800 anD D800-Dante a-net Distributors user GuiDe

32-Channels - Analog & Digital Inputs

This hybrid system uses one digital console card plus one analog AN-16/i v.2 Input Module to provide up

to 32 inputs to the network. The console card provides network slots 1-16 of the network; the AN-16/i v.2

Input Module provides slots 17-32.

To configure this system:

• Connect A-Net Out on the console card to A-Net IN on the AN-16/i v.2 with a Cat-5 cable.

• Set the SlOt rANge switch on the AN-16/i v.2 to 17-32.

• Connect a Cat-5 cable from A-Net Out on the AN-16/i v.2 to A-Net IN on the D800. (If the

D800-Dante is used, the Dante Disable DIP switch (#10 in Switch Block 1) must be in the

up position to use the A-Net input. The Dante interface’s Stereo Link DIP switches are

ignored)

• Set Stereo Links as needed on the console cards and/or AN-16/i v.2.

• Connect Personal Mixers to the D800’s front panel A-Net ports.

• Create custom channel maps for A360 Personal Mixers with the free A360 Channel

Manager software.

The A-Net Out from the console card connects to the analog input module’s A-Net In port. The Pro16e A-Net Out on the

AN-16/i v.2 connects to A-Net In on the D800.

Note: If A-16II and A360 Personal Mixers will both be used in this type of network, it is important

to note that the A-16II will ignore network slots 17 and above. Make sure you assign audio

sources that are critical for users of the A-16II to slots 1-16 of the network.