Manual

D800 A-Net Distributor Specifications
A-Net to/from Personal
Mixers (front panel)
Eight locking RJ45 connectors, powered
2-position switch (I/II) accommodates A-16II (I) and the
bidirectional A360 Personal Mixer (II)
A-Net In or
A-Net Bridge In
Accepts Pro16 or Pro16e A-Net;
One locking RJ45 connector
A-Net Out (rear panel)
Pro16e A-Net;
One locking RJ45 connector, unpowered
A-Net Mixes Out
Pro16e A-Net;
One locking RJ45 connector, unpowered;
Provides up to 16 channels of Network Mix Back™ data from up
to eight A360 Personal Mixers
Ethernet
One RJ45 connector
LEDs
Power On (red); Sync (green)
USB
Used for firmware updates
Pro16 A-Net Support
Transmits 16 channels of digital audio to A-16II and A-16R
Personal Mixers
Pro16e A-Net Support
Transmits up to 64 channels of digital audio to A360 Personal
Mixers
A-Net Cables
Front Panel Connections: Shielded Cat-5e (or better) cable must
be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47
CFR Part 15 Class B emissions limits.
Unshielded Cat-5e cable may be used on all rear panel
connections.
Output Voltage for
Personal Mixers
24VDC, 0.5 amp
Transmitted over the Cat-5e cable
Power Supply
Internal, universal switching type, IEC connector
Input Voltage
100-240VAC, 50-60Hz, 300W
Fuse - 250VAC~ T4AL
Dimensions
19” (482.6 mm) wide x 14.25” (362 mm) deep;
2U, 3.5” (88.9 mm) high
Weight
12.0 lbs (5.44 kg)
41D800 anD D800-Dante a-net Distributors user GuiDe