Installation guide

DMP-300 INSTALLATION GUIDE PAGE 11 OF 20
P/N DMP010 V3.0
3.5 Connector Pinouts
Pin Name Description
1 PWR Aircraft power, 10-35 VDC
2 PWR Aircraft power, 10-35 VDC
3 TRIG1 External trigger input 1
4 TRIG2 External trigger input 2
5 TRIG3 External trigger input 3
6 TRIG4 External trigger input 4
7 TRIG5 External trigger input 5
8 TRIG6 External trigger input 6
9 TRIG7 External trigger input 7
10 PAUSE External PAUSE/PLAY command
11 TRIG1_Active
The audio track associated with External
trigger input 1 is playing, if configured
12 GND Aircraft power return
13 GND Aircraft power return
14 TRIG2_Active
The audio track associated with External
trigger input 2 is playing, if configured
15
BUSY/
TRIG3_Active
BUSY output, OR the audio track associated
with External trigger input 3 is playing, if
configured
16 CHIME CHIME output, open collector
17 AUDL Audio output, left channel
18 AGND Audio ground
19 AUDR Audio output, right channel
20 AGND Audio ground
21 DIM5 Dimmer input, 0-5VDC* (see note)
22 DIM14 Dimmer input, 0-14VDC* (see note)
23 DIM28 Dimmer input, 0-28VDC* (see note)
24 GPSIN RS-232 or RS-422/485 GPS serial data in
* NOTE: connect only one dimmer input, leave the others
N/C