Installation manual

DMP-100 USERS GUIDE PAGE 16 OF 23
P/N DMP020 V1.7
To Select Triggers or Attributes:
The “Triggers and Attributes” tab allows you to select either Speech or Music tracks, and
then to specify the following information:
♦ Discrete Triggers
Click on the check box next to any available discrete trigger to associate that track
with the corresponding trigger. More than one trigger may be assigned to a single
track. Clicking on “View” will display the track which has been associated with that
trigger. If the corresponding audio track is later deleted, the trigger will also be
deleted.
♦ GPS Triggers
Enter the latitude and longitude and desired distance from that lat/lon for which to
trigger the selected track. You may also select “<Continuous Mix>” or “<Play Full
List>” to be triggered.
Select “Trigger First Time Only” to prevent the track from playing each time the GPS
trigger is active (until the next power-up), otherwise select “Trigger Every Time”.
For example, an aerial tour may desire speech tracks to be played at each point of
interest on the outbound flight, but not on the return flight. These waypoints would be