User Manual

6. Attach landing gear to fuselage with four 4x12mm machine screws. Landing gear should look

swept back. This will give proper ground handling and correct fitment of wheel pants. After

securing the screws, attach foam cover piece with glue, or clear tape to make removal later

easier

7. Wheel pants are attached to the landing gear leg first with a 3x12mm machine screw. Then

insert wheel into wheel pant, and screw in 4x37mm axel screw that also helps secure the

fairing. Repeat for both legs.

4x12mm 4pcs

4x37mm 2pcs

3x12mm 2pcs

sports flying redefined