User Manual

Your Bushmule comes supplied with high quality plastic skis for use on snow and even on sand. These
skis add greatly to the versatility of the Bushmule and are very straight forward to install and add a fun
and exciting aspect to flying the model. Please follow the guide below when installing the skis.
With all wheels removed from the undercarriage slide each ski onto the wheel axles followed by the
tension spring ensuring the loop at the rear of the spring is corrected located onto the plastic post as
shown. With the spring location and installed in place, secure each ski to the axle the wheel collars.
Note, when not on the ground all skis should spring forward/upwards. This is normal.
We have a few hints to help when flying the Avios Bushmule, when measuring the CoG take some time
to adjust this to match your flying style. Moving the battery to adjust the CoG forward and aft to find
your personal balance point.
Another great tip is to balance your new plane laterally (wing tip to wing tip) this is a looked over but
important balance before you fly.
Balancing the 3 bladed propellers always helps to keep vibration to a minimum and help with efficiency.
With your Avios Bushmule fully built and ready for flight now is a perfect time to go over your model
once more to make sure nothing is over looked, all screws, nuts and bolts are secure and your flight
control surfaces are all correct and secure.
7. Hints
8. OPTIONAL SKIS
12