BushMule V2 Manual

• Inspect the propellers, and mounting nut/bolts frequently, especially if you’ve suffered a hard

landing or a prop has been knocked.

• If you intend to use the supplied skis on snow, and sand, or you wish to fit the optional floats, and

fly off of water, it is recommended that you add a coat of clear acrylic varnish to the applied decals.

Prolonged exposure to water may cause the decals to lift from the surface, leaving a tired appear-

ance, let’s face it, no one likes a tired looking ass. Please, test your varnish on a scrap piece of

EPO first to ensure it does not react to the foam.

• Our final suggestion is to add a mixture on your Transmitter to enable throttle to be mixed with

your rudder inputs. Even though the optional floats have the provision for a water rudder it’s a lot

easier to taxi on water, snow or rough fields with this additional mix. Flying the BushMule V2 with

this throttle / rudder mix also opens up the Bushmule’s wild side with flat spins and crazy antics.

(please check your transmitters owner’s manual for the mixing instructions.)

Thank you again for purchasing the Avios BushMule V2.

We hope you’ll have many happy days of flying in wide open skies

Don't forget, spare parts are available for this model.