User manual

Active Record
Active Record: Active record will show up when the device is actively recording. Active recording functions
like motion detection, scheduler, or an alarm will set off this automatic recording.
When active recording is not activated it will look like the picture below
When the active recording function is activated it will light up in red.
Record
Record: The record button on the 9070IR-PoE when pressed will record the live video feed and save the
video into the computer viewing.
To record follow the following steps:
1.) Click on the record button
2.) Then select the designated folder to store the file. Then hit okay.
3.) Once the folder has been selected the device will start to record.
To stop recording click on the red icon and it will return to the original state.
Note: Remember VLC codec is required to play the video files that are recorded
Snapshot
Snapshot: Snapshot mode takes pictures of the current video and save them. The picture will appear in
another internet browser window, so it is necessary to turn off pop up blockers which will prevent the picture
from appearing.
Note: Make sure that popup blockers are disabled when using this function.
To use the snapshot function:
1.) Click on the snapshot button
- 21-
Ref#90020326K0709