User Guide

1.) To edit a scheduled event, click on the even that you would like to edit
2.) Edit the settings.
3.) Then hit the submit button for confirmation.
Ping
The Ping Function on the 9258 Wifi allows the device to Ping other devices to make sure there is
connectivity. If the device is not responding to the ping signals sent by the 9258 Wifi, the 9258 Wifi will
automatically respond by turning the device On, Off, or resetting the device.
The Ping Settings consist of:
Name: This section shows the name of the device
Enable / Disable: This section allows you to disable or enable the ping function
Host Name / IP Address: Enter the host name or the IP Address of the device or computer that
you need to ping.
Ping Failures: This is the number of Ping failures to occur simultaneous before the 9258 Wifi
activates the selection action
Action: This section allows the user to set the action of the 9258Wifi when
Auto Self Pinger: The auto self pinger is a watchdog function for the 9258 Wifi. If enabled the
device will try to ping itself to make sure the device is working properly. If no response is reached
then it will automatically restart itself .
- 24 -