User Guide

‧
GetPower – Tells you the current power settings
http://192.168.1.100:90/GetPower.cgi
?
‧ SetStartup – Sets the Default Startup Value for Ports 1-4
http://192.168.1.100:90/SetStartup.cgi?status=1+p1=1+p2=0+p3=1+p4=0
status= 0 is Disable , 1 is Enable
‧ GetStartup – Get the Default Startup Value for Ports 1-4
http://192.168.1.100:90/GetStartup.cgi
?
Name
‧
SetDeviceName – Set the Device Name
http://192.168.1.100:90/SetDeviceName.cgi?Name
=
‧
GetDeviceName – Get Device Name
http://192.168.1.100:90/GetDeviceName.cgi
?
‧
SetPowerName – Set Power Name for Each Outlet
http://192.168.1.100:90/SetPowerName.cgi?p1=test1+p2=test2+p3=test3+p4=test4
‧
GetPowerName – Get Power Name
http://192.168.1.100:90/GetPowerName.cgi
?
Others
‧
GetVer – Get the Firmware Version of the 9258 WiFi
‧
GetSeries – Get the Serial Number of the 9258 WiFi
‧
Demo.cgi – Sets the 9258 WiFi in Demo Mode
http://192.168.1.100:90/Demo.cgi?start=0
http://192.168.1.100:90/Demo.cgi?stop=1
Serial Com (RS-232) Control
Serial Port (RS-232)
The Com1 allows you to read the status of the 9258 WiFi. Information can be extracted through
this port like an output
1.) Use DB9 cable connect to the COM1 of PC and the RS232 of device
2.) Execute WIN program "Hyper Terminal" : please go to " Start" / "program" /
"Accessories" / "Communications" / "Hyper Terminal" .
3.) Enter a name and choose an Icon.
- 41 -